Peaty's Rimjob Tubeless Tape 21 mm - 9 m

Product description

High tensile strength rim tape
Adheres perfectly to the inner side of the rim, as if it were part of it
The tape's transparency allows perfect alignment with the valve hole
Dimensions: 9 m x 21 mm

Installation Instructions:

1. After removing the tire, remove the old tape from the rim.
2. Thoroughly clean the inner wall of the rim using an alcohol-based degreaser.
3. Before applying the tape, ensure the rim is dry and free of any dirt.
4. Start approximately 10 cm away from the valve hole and proceed towards it. Press the tape firmly
5. into the center of the rim’s inner wall and smooth it out towards the edges. Press out all trapped air.
6. Continue the same way around the entire rim circumference, overlapping by about 10 cm past the valve hole.
7. Pierce the tape sharply in the center of the valve hole.
8. Install the MK2 valve.
9. Mount the tubeless tire and fill it with Peaty’s Tubeless Sealant.
10. Inflate the tire to a higher pressure than your usual riding pressure.
11. Shake the inflated tire thoroughly and allow it to rest.
12. Before riding, reduce the pressure to your preferred riding level.